0£0.00

You have no items in your shopping cart.

View Basket

Product was successfully added to your shopping cart.
  • Personalised silicone moulds. Choice of 4 shapes. Add your Logo/Text/Message Personalised silicone moulds. Choice of 4 shapes. Add your Logo/Text/Message
Previous

Extra Moulds ordered subsequently.

Personalised silicone moulds. Choice of 4 shapes. Add your Logo/Text/Message

SKU: silmldorstnew

Quick Overview

Excl. Tax: £0.00 Incl. Tax: £0.00

Availability: In Stock

* Required Fields

Excl. Tax: £0.00 Incl. Tax: £0.00

These personalised moulds are available on 4 standard shapes. Rectangle, Oval, Square and Round. The initial cost includes origination to your specification and to produce 3 'formers' that are used to produce the first mould, with subsequent moulds using the same formers. In the drop down list below you can order a single original as well as ongoing duplicates which are at a reduced price.

It is important that you order original and duplicates separately, i.e. you may wish to order 6 moulds, so that would be 1 original and 5 duplicates which would be 2 cart entries in the same order. If you wish to order duplicates at a later date you will need to email us with your original order number so as we can identify the former
Your Original Order must be accompanied by an Email of your requirements with any precise fonts specified and your logo attached, preferably as either a .pdf, .psd or .ai file. Please send this email to: design@thesoapkitchen.co.uk
It is VERY IMPORTANT that you read our terms and conditions for the moulds - failure to do so will result in a delay with mould manufacture.

Important... We recommend these moulds for use in melt & pour soap making for best results. Although silicone is a suitable material for cold-process or hot-process soap, the detail of moulds will be better reproduced with melt and pour soap base.

Measurements...

All moulds are designed to be maximum 26mm deep with other measurements as follows...

Oval 75mm x 50mm
Rectangle 75mm x 50mm
Circle 60mm diameter
Square 60mm x 60mm

Dimensions are approximate

Terms & Conditions...
It is important that your order is accompanied by clear and legible information. It must be noted that text and logos are better if they are bold. Certain complex or fine fonts or complex logo designs may not be suitable. Logos or images should be in clear line drawings. Care should be given to limit the number of characters in any message to ensure they are not too small and numerous to be successfully included in your mould. Once we have your requested requirements we may contact you to offer amendments if we think the design unsuitable. If we are not able to agree a design any pre-payment will be fully refunded. No design will be manufactured without full written agreement and payment. Written agreement will be deemed acceptable when sent in an email.

Please note that there is no refund available on these products once any manufacturing has been completed. Should images or logos require re-drawing in order to produce a clear design we may have to charge a suitable supplement for the time taken.

Additional Information

Extended Information Important... We recommend these moulds for use in melt & pour soap making for best results. Although silicone is a suitable material for cold-process or hot-process soap, the detail of moulds will be better reproduced with melt and pour soap base.

Measurements...

All moulds are designed to be maximum 26mm deep with other measurements as follows...

Oval 75mm x 50mm
Rectangle 75mm x 50mm
Circle 60mm diameter
Square 60mm x 60mm

Dimensions are approximate

Terms & Conditions...
It is important that your order is accompanied by clear and legible information. It must be noted that text and logos are better if they are bold. Certain complex or fine fonts or complex logo designs may not be suitable. Logos or images should be in clear line drawings. Care should be given to limit the number of characters in any message to ensure they are not too small and numerous to be successfully included in your mould. Once we have your requested requirements we may contact you to offer amendments if we think the design unsuitable. If we are not able to agree a design any pre-payment will be fully refunded. No design will be manufactured without full written agreement and payment. Written agreement will be deemed acceptable when sent in an email.

Please note that there is no refund available on these products once any manufacturing has been completed. Should images or logos require re-drawing in order to produce a clear design we may have to charge a suitable supplement for the time taken.

Feefo Reviews - Average 0% (0 reviews)

This product has no reviews yet.